House Minimalis Technical mural True

Small Minimalist House Design Technical mural True -

In the previous article we discussed how to create plamir the wall with the correct composition so he could get a good plamir quality after a surface of the flat wall diplamir and refined plamir means the next task is the painting of the wall.

work painting the walls is a very easy job, most people, especially men can do the job, but the end result would have been different, depending on the technique and quality of the paint used, although next time we will share the techniques of painting the walls of the right to produce the highest quality

This is a step technique step of painting the walls for a new home.

1. After plamir completed, wait at least 7 weeks (the more the better), then the surface plamir smoothed rubbed with sandpaper, this time, you can enjoy Machinery grinding to smooth to work faster and quality for maximum results.
2. After a smooth plamir surface clean surface plamir with a lap and a half wet so that the dust of the old thread plamir surface plamir
3. Prepare a solution 'waterproof (commercially known under the brand NODROP Flintkote, ELASTEX, etc.) and mix it with water in a ratio of 1: 5, then kuaskan wall until smooth, for it prevent paint does not penetrate and growth of the foam to damp room
4. Prepare the paint and mixed with. up to 20%, the paint of the first water was done using a brush or rool with the movement upwards and downwards.
5. Let stand for 1-2 hours before painting two, can be done by painting the walls on the other side.
6. Painting the second time, mixing paint with 10% water if using a brush made with a zigzag movement up and down, try as regularly as possible so that the paint is not streaks visible.

techniques of painting the walls of the old

1. get rid of all the stuff on the walls, be it photos, paintings or other, and also delete items or furniture near the wall and cover with a cloth or paper
2. Clean the surface of the wall with a damp cloth to prevent dust and dirt on the wall has disappeared if there are stubborn stains can be rubbed with fine sandpaper.
3. Close all the walls are fractured and holes with plamir condensed to dry.
4. Then do step 4 above and next steps.

to produce maximum quality, you must also know the character and painting the spectrum of colors that can be read here